87-93 Ford Mustang T5 Transmission Swap Complete AOD to 5 Speed Conversion Kit

Description

DO TO THE NATURE OF LARGE BACKORDER ON TREMEC PARTS THIS SWAP WILL HAVE A HANDLING PERIOD BEFORE BEING SHIPPED OUT. PLEASE PAY ATTENTION TO THE TIME FRAME. THANK YOU AND SORRY FOR ANY INCONVENIENCE. 4/2022
THESE LINKS ARE FOR INFORMATIONAL PURPOSES ONLY  AND DIRECTLY RELATES TO ITEM BEING SOLD HERE. HAVE ANY QUESTIONS EMAIL ME THROUGH EBAY. CHECK OUT YOUTUBE VIDEO REVIEWING THIS KIT.
.
https://youtu.be/oW6_6ChzoP0
INSTALL T5 SWAP VIDEOS FOUND HERE: PART 1:
https://youtu.be/a7obRTduDpA
PART 2:
https://youtu.be/a7obRTduDpA
PART 3:
https://youtu.be/yTQPY4SZo6U
•
THE FIRST PICTURE IS A STOCK PHOTO OF THE KIT. PLEASE BE AWARE WE BUILD TO ORDER SO SOME PARTS ON THIS SWAP WILL NEED ORDERED. THESE KITS ARE BUILT VERY SPECIFIC TO ORDER. PLEASE CONTACT ME FEEL FREE 330-233-3186. THANKS FOR LOOKING
DESCRIPTION:
Up for sale is a complete T5 Transmission Swap. This is everything you need to CHANGE you AOD automatic foxbody over a 5 speed with MANY new parts included! FULL LIST OF THOSE PARTS BELOW!! The transmission has been newly rebuilt with a master rebuild kit from Bob Hanlon at hanlon motorsports in PA. The rebuild kit and supporting parts alone cost 0 to do this transmission alone!. Strong rebuild for a stock or even a lightly modified foxbody mustang. CAN be used in resto mods for models in the 1960's but fabrication and some parts wont be used!
THIS IS NOT A 4CYL TRANSMISSION, THIS IS A V8 WORLD CLASS TRANSMISSION with either 13-52-199, 13-52-208 or 13-52-169 trans codes.
Similar
TRANSMISSIONS sell for over 00 alone on most resto and rebuild sites! LOTS Of new wearable items replaced in the WHOLE kit not just trans!  Makes a nice swap for fox body people to swap out the tired AOD or even for you factory five kit car folks to use on your kit car. I have the complete engine and axle as well if you are a factory five guys.
FOLKS your buying my years of professionalism and knowledge of putting these T5 swaps together for you here on ebay! VERY high ratings doing so and would like to keep it that way!
FITS ALL FOXBODYS 87-93 DOING THE SWAP. RATHER MASS AIR OR SPEED DENSITY!
LOOK AT MY RECENT AND PAST FEEDBACK YOU WILL SEE UPTEEN T5 COMPLETE SWAPS ON THERE. RECENTLY SOLD THERES A BUNCH OF OTHERS IN MY FEEDBACK NOT INCLUDING THE NUMBEROUS THAT ORDERED THEM FROM ME ON MY WEBSITES. ALL HAPPY CUSTOMERS BECAUSE I MAKE SURE ITS RIGHT OR IT DOESNT LEAVE MY SHOP.*FACTORY FIVE FOLKS, I HAVE OTHER PARTS TO SWAP IN AND OUT FOR THIS KIT AS NEEDED AS I VERY AWARE THAT NOT ALL PARTS IN THIS KIT ARE NEEDED* EXAMPLE: FUSE BOXES, EBRAKE HANDLES, A-ARMS ETC. EMAIL ME.
THESE LINKS BELOW ARE TO MY YOUTUBE CHANNEL SHOWING YOU HOW TO INSTALL THIS VERY KIT ON A FOX BODY MUSTANG!
PART 1:
https://youtu.be/a7obRTduDpA
PART 2:
https://youtu.be/9M_vgXMAWFo
PART 3:
https://youtu.be/yTQPY4SZo6U
THERE IS AN OPPORTUNITY (PENDING TIME FRAME) OF INSTALL. THE PRICE VARIES
*IMPORTANT NOTICE: THE PRICE OF T5'S THROUGH DISTRIBUTORS WENT UP CONSIDERABLY OF THE LAST FEW YEARS PLEASE BE PATIENT WITH BACKORDER SMALL PARTS!
SHIPPING: SHIPPING WILL COME IN 3 BOXES FOR 5. ALL FULLY INSURED PROPERLY FOR THE AMMOUNT YOU PAID. PLEASE ALLOW 2-3 BUSINESS DAYS FOR ME TO PROPERLY AND SAFELY PACKAGE ALL THE GOODIES.
HERES A LIST OF WHAT YOU WILL GET:
-T5 Borg Warner World Class Transmission w/ Master rebuild kit. & Supporting parts. Trans ID: 13-52-169/199/208
-T5 supporting parts like Steel bearing retainer <---ALLOWS FOR MORE SUPPORT AND HP.
-T5 rear counter shaft billet steel support bracket. <-- ALLOWS FOR MORE HP.
-T5 Bellhousing Cleaned, jet washed and painted high heat. OR NEW PENDING CONDITION.
-Clutch fork and Nut in bellhousing still intact and serviceable. OR NEW INSTALLED.
-Freshly machined OEM 50oz flywheel. OR NEW AFTERMARKET PENDING CONDITION.
-6 OEM OR NEW replacement clutch set metric bolts
-6 OEM OR NEW replacement FLYWHEEL bolts for T5 (AOD are shorter)
-Brand NEW HD Clutch Set MCLEOD OPTIONAL. OR FACTORY REPLACEMENT.
-Brand New HD Pressure Plate MCLEOD OPTIONAL
OR FACTORY REPLACEMENT.
-New Throw Out Bearing
-New Pilot Bearing
-Clutch alignment tool new (part of kit)
-New UPR ADJUSTABLE clutch cable from Bob Hanlon @ Hanlon Motor Sports
-New UPR AFTERMARKET clutch cable quadrant for maximum adjustments. Bob Hanlon @ Hanlon Motor Sports
-NEW UPR AFTERMARKET FIREWALL ADJUSTER for max adjustments for your clutch. The cable still has rubber boot on it as well so if you wanted to use the rubber boot and not the adjuster that's fine. Can use either or but included!
-Transmission Crossmember NEW OR OEM CLEANED. NOT ROTTED. CLEAN!
-Transmission Rubber crossmember mount. NEW WITH SUPPORT BRACKET.
-Transmission exhaust hanger. This is the hanger that mounts between the mount and transmission for your exhaust hangars on your H-PiPE.
IF APPLICABLE NOT ALL SWAPS HAVE THIS AVAILBLE SO IF SENT IN ADDITION IS BECAUSE I HAD IT WITH THE SWAP THAT CAME OUT. SORRY NOT ALL HAD THEM. NOT REALLY NEEDED.
-T5 harness includes plugs for VSS sensor, reverse light switch and the Neutral Safety Switch. This harness must be run for the car to start properly. It will require you to pull drivers seat and that part of carpet up. Will send a different version if the build does not require Sensors.
-COMPLETE fox body Pedals assembly WITH ALL 3 THE SWITCH/SENSORS THESE PEDALS ARE RESTORED FOLKS!
-Pedal position Sensor (attached to pedals) also used for cruise control.
-Pedals Neutral Safety Switch (attached to pedals)
-Transmission Neutral Safety Switch/Sensor on the transmission itself w/ pin
-Transmission reverse light switch sensor on the side of the transmission
-Brand new rear transmission tailshaft seal (as per part of the full rebuild)
-Driveshaft cleaned and painted with rustoleum. U-joints inspected and replaced if needed. I wont send one that needs U-joints those are cheap and easy to replace if they are needed. Yoke inspected and replaced if needed.
-Stock OEM shifter base and shifter. (basically the shift base that attaches to tail shaft).
May send an aftermarket replacement in its place!
AGAIN ONLY AN AVAILBILITY THING. POSSIBLE AFTERMARKET if OEM isnt availble.
-Stock OEM shifter leather boot (has small cut easy fix) and shifter handle. Or aftermarket new replacement.
-Stock OEM shifter plate ( some assembly required and possible modifications to the transmission hole on an AOD. this is the physical plate that covers the transmission hole and bolts to the floor pan w/ rubber surrounding. AOD cars have smaller transmission hole so the 2 rear screws will fit just fine but the other two wont line up. I just use machine screws to hold the other 2 bolts down) . This specific one has a tear in it but otherwise reuseable.
-302 Engine and Bellhousing Block Plate. Clean ready to install. Has some wear marks and notch from rubbing. Otherwise reuseable. I may send a new on pending if I have any.
-All the bolts and hardware that takes to install it. Clutch bolts for pressure plate, Trans to bellhousing bolts, etc.. Everything put back together with plenty of sealer, new seals and tail shaft seal and all the sensors and switches intact.
SPECIAL NOTE: THIS TRANSMISSION TAKES JUST UNDER 3 QUARTS OF THE RED DEXTRON III TRANSMISSION FLUID NOT GEAR LUBE. WORLD CLASS TRANSMISSIONS USED RED DEX III. I HIGHLY SUGGEST RUNNING 2 QUARTS DEX III AND THE REST OF THE FLUID USE THE SYNCROMESH MANUAL TRANSMISSION FLUID. ITS A GOOD FLUID TO USE IN COMBINATION WITH THE OTHER 2 QUARTS OF DEX III ON FRESH REBUILDS WORKS PERFECT FOR WEAR IN.
CHECK OUT MY FOX BODY PARTS STORE. CLICK THE RED DOOR UNDER MY NAME. LOTS OF GREAT PARTS THERE.
ANY QUESTIONS OR CONCERNS 330 233 3186OR EMAIL.
DISCLAIMER:
-BEST OFFER/FIXED PRICE AUCTIONS
: Even though the duration is 30 days on fixed price auctions YOU DON’T HAVE TO WAIT THAT LONG TO BUY IT! Fixed Price auctions are buy it now auctions. OR…Best offer auctions are there to negotiate the price with the seller (myself) and you. Instead of having to “Bid””. No one wants to be outbid and that can be frustrating. Keep in mind, ebay will automatically decline your offer for me if you don’t offer a “fair” amount. And you only get 3 chances to offer. If you get locked out of offering just email me.
-
ALL items
are as is no warranty or refunds HOWEVER, before you leave negative or netural feedback about something that has came to you broken or not as described, contact me please as I will do everything I can to make your experience  with me a good one.
-PAYMENT
: I accept paypal as well as credit cards over phone thru paypal. I can take payment over the phone.  Payment over the phone is an additional 4% charge due to credit card policys. All items must be paid for within 48 hours of end of auction. Unless we arrange someother terms IN ADVANCE.
-SHIPPING
: I ship ups ground mainly. Some items are shipping USPS priority so you get them fast. I also use freight and Greyhound package express on occasions. You will usually receive your item within a week of buying it. Sometimes Greyhound is a little longer for big packages. INTERNATIONAL BUYERS PAY ADDITIONAL SHIPPING. THIS INCLUDES PUERTO RICO, CANADA, ALASKA AND MEXICO. PLEASE CONTACT ME PRIOR TO BUYING ILL GET YOU AS ACCURATE A QUOTE AS POSSIBLE. YOU AGREE TO THIS WHEN YOU BUY AN ITEM FROM ME.
-FEEDBACK
: Feedback is promptly left for those that leave me feedback as well. The buyer usually supposed to leave feedback first. If your experience is a good one, and your above average satisfied please leave me good ratings and good feedback. I will do the same
--I feel I have described the item to the best of my ability. By bidding/offering and winning the item you agree to the conditions and the auction description.